Beko Household Appliance Error Codes

Complete diagnostic guide for Beko household appliances in Australia including washing machines, dryers, dishwashers, refrigerators, and ovens.

Washing Machine Error Codes

Error codes for Beko washing machines including water supply, drainage, heating, and door lock issues.

Error Code	Meaning	Possible Causes	Solutions
E01	Water inlet problem	Water tap closed or not fully open Inlet hose kinked or blocked Faulty inlet valve Low water pressure Inlet filter blocked	Check that the water tap is fully open Inspect the inlet hose for kinks or blockages Clean the inlet filter if accessible Check water pressure in your home Test the inlet valve and replace if faulty Ensure the inlet hose is properly connected
E02	Water inlet problem	Water tap closed or not fully open Inlet hose kinked or blocked Faulty inlet valve Low water pressure Inlet filter blocked	Check that the water tap is fully open Inspect the inlet hose for kinks or blockages Clean the inlet filter if accessible Check water pressure in your home Test the inlet valve and replace if faulty Ensure the inlet hose is properly connected
E03	Water drainage problem	Drain filter blocked Drain hose kinked or blocked Faulty drain pump Drain hose positioned too high Blockage in drain system	Clean the drain filter located at the front bottom of the machine Check the drain hose for kinks or blockages Ensure the drain hose is positioned correctly (not higher than 100cm) Test the drain pump and replace if faulty Remove any blockages from the drain system Check that the drain hose is properly connected
E05	Heating system error	Faulty heating element Defective temperature sensor Electrical connection problem Control board malfunction	Check the heating element for continuity using a multimeter Test the temperature sensor and replace if faulty Inspect electrical connections for damage or corrosion Check the control board for error codes Contact a qualified technician if heating element needs replacement
E09	Door lock problem	Door not properly closed Faulty door lock mechanism Door lock sensor malfunction Electrical connection issue	Ensure the door is fully closed and latched Check the door lock mechanism for damage Test the door lock sensor Inspect electrical connections to the door lock Replace the door lock assembly if faulty

Dishwasher Error Codes

Error codes for Beko dishwashers including water supply, drainage, heating, and sensor issues.

Error Code	Meaning	Possible Causes	Solutions
E01	Water drainage problem	Drain hose kinked or blocked Filter blocked or dirty Drain pump faulty Drain hose positioned incorrectly	Check the drain hose for kinks or blockages Clean the filter in the bottom of the dishwasher Ensure the drain hose is positioned correctly Test the drain pump and replace if faulty Remove any food particles or debris from the drain system
E02	Water inlet problem	Water tap closed or not fully open Inlet hose kinked or blocked Faulty inlet valve Low water pressure	Check that the water tap is fully open Inspect the inlet hose for kinks or blockages Test the inlet valve and replace if faulty Check water pressure in your home Ensure the inlet hose is properly connected
E03	Heating element problem	Faulty heating element Electrical circuit error Control board malfunction Temperature sensor fault	Check the heating element for continuity Inspect electrical connections for damage Test the temperature sensor Check the control board for error codes Contact a qualified technician for heating element replacement
Er:04	Turbidity sensor problem	Turbidity sensor dirty or blocked Faulty turbidity sensor Wiring harness error Control board malfunction	Clean the turbidity sensor located in the sump area Check the sensor for damage or corrosion Inspect the wiring harness for loose connections Test the sensor with a multimeter Replace the turbidity sensor if faulty

Refrigerator Error Codes

Error codes for Beko refrigerators including temperature control, compressor, and sensor issues.

Error Code	Meaning	Possible Causes	Solutions
E1	Temperature sensor error	Faulty temperature sensor Sensor wiring problem Control board malfunction	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes
E2	Compressor start error	Compressor overload Electrical connection problem Faulty compressor relay Low refrigerant	Allow the refrigerator to rest for 30 minutes Check electrical connections to the compressor Test the compressor relay Contact a qualified technician for refrigerant check
E3	Defrost system error	Faulty defrost heater Defrost sensor malfunction Control board error	Check the defrost heater for continuity Test the defrost sensor Check the control board for error codes Replace faulty components as needed

Dryer Error Codes

Error codes for Beko dryers including heating, motor, and sensor issues.

Error Code	Meaning	Possible Causes	Solutions
E1	Heating element error	Faulty heating element Temperature sensor malfunction Thermal fuse blown	Check the heating element for continuity Test the temperature sensor Check the thermal fuse and replace if blown Inspect electrical connections
E2	Motor error	Faulty motor Motor capacitor problem Belt issue	Check the motor for proper operation Test the motor capacitor Inspect the drive belt for damage Replace faulty components as needed
E3	Temperature sensor error	Faulty temperature sensor Sensor wiring problem	Test the temperature sensor Check sensor wiring connections Replace the sensor if faulty

Oven Error Codes

Error codes for Beko ovens including heating, temperature control, and sensor issues.

Error Code	Meaning	Possible Causes	Solutions
E1	Temperature sensor error	Faulty temperature sensor Sensor wiring problem Control board malfunction	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes
E2	Heating element error	Faulty heating element Electrical connection problem Control board error	Check the heating element for continuity Inspect electrical connections Test the control board Replace the heating element if faulty
E3	Door lock error	Door not properly closed Faulty door lock mechanism Door lock sensor malfunction	Ensure the door is fully closed Check the door lock mechanism Test the door lock sensor Replace the door lock if faulty

Need More Help?

If you're experiencing issues with your Beko appliance that aren't covered by these error codes, or if the solutions provided don't resolve your problem, we recommend:

Consulting your Beko appliance user manual for model-specific information
Contacting Beko customer service in Australia for technical support
Seeking assistance from a qualified appliance repair technician
Checking for warranty coverage if your appliance is still under warranty

Back to All Brands Browse Diagnostic Database