Fisher & Paykel Household Appliance Error Codes

Complete diagnostic guide for Fisher & Paykel household appliances in Australia including washing machines, dryers, dishwashers, ovens, refrigerators, and cooktops.

Refrigerator Error Codes

Error codes for Fisher & Paykel refrigerators including temperature sensor, defrost system, fan motor, and display issues.

Error Code	Meaning	Possible Causes	Solutions
F2	Defrost error	Faulty defrost heater Defrost sensor malfunction Control board error Defrost system blockage	Check the defrost heater for continuity Test the defrost sensor Check the control board for error codes Remove any blockages from the defrost system Replace faulty components as needed
F4	Freezer sensor problem	Faulty freezer temperature sensor Sensor wiring problem Control board malfunction	Check the freezer temperature sensor connections Test the sensor with a multimeter Replace the freezer temperature sensor if faulty Check the control board for error codes
F6	Defrost sensor problem	Faulty defrost sensor Sensor wiring problem Control board error	Check the defrost sensor connections Test the sensor with a multimeter Replace the defrost sensor if faulty Check the control board for error codes
F15	Refrigerator fan problem	Faulty refrigerator fan motor Fan blocked or obstructed Fan wiring problem	Check the refrigerator fan motor operation Remove any obstructions from the fan Test the fan motor and replace if faulty Inspect fan wiring connections
F17	Freezer fan problem	Faulty freezer fan motor Fan blocked or obstructed Fan wiring problem	Check the freezer fan motor operation Remove any obstructions from the fan Test the fan motor and replace if faulty Inspect fan wiring connections
F20	Flapper heater error	Faulty flapper heater Heater wiring problem Control board error	Check the flapper heater for continuity Test the heater wiring Replace the flapper heater if faulty Check the control board for error codes
F24	Ice maker sensor problem	Faulty ice maker sensor Sensor wiring problem Control board error	Check the ice maker sensor connections Test the sensor with a multimeter Replace the ice maker sensor if faulty Check the control board for error codes
F30	Display error	Faulty display module Display connection problem Control board error	Check the display connections Test the display module Reset the refrigerator by unplugging for 5 minutes Contact a qualified technician
E0	Electronic communication error	Control board communication failure Module connection problem Electronic system error	Reset the refrigerator by unplugging for 5 minutes Check all module connections Test the control board Contact a qualified technician
E1	Freezer fan motor problem	Faulty freezer fan motor Fan motor wiring problem Control board error	Check the freezer fan motor operation Test the fan motor and replace if faulty Inspect fan motor wiring connections Check the control board for error codes
E2	Evaporator fan motor problem	Faulty evaporator fan motor Fan motor wiring problem Control board error	Check the evaporator fan motor operation Test the fan motor and replace if faulty Inspect fan motor wiring connections Check the control board for error codes
Ed	Defrost system error	Faulty defrost system Defrost heater problem Defrost sensor malfunction	Check the defrost heater for continuity Test the defrost sensor Check the defrost system components Replace faulty components as needed

Washing Machine Error Codes

Error codes for Fisher & Paykel washing machines including water inlet, drainage, heating, motor, and door lock issues.

Error Code	Meaning	Possible Causes	Solutions
E01	Water inlet problem	Water tap closed or not fully open Inlet hose kinked or blocked Faulty inlet valve Low water pressure Inlet filter blocked	Check that the water tap is fully open Inspect the inlet hose for kinks or blockages Clean the inlet filter if accessible Check water pressure in your home Test the inlet valve and replace if faulty Ensure the inlet hose is properly connected
E02	Drainage problem	Drain filter blocked Drain hose kinked or blocked Faulty drain pump Drain hose positioned too high Blockage in drain system	Clean the drain filter located at the front bottom of the machine Check the drain hose for kinks or blockages Ensure the drain hose is positioned correctly Test the drain pump and replace if faulty Remove any blockages from the drain system
E03	Heating problem	Faulty heating element Heating element wiring problem Control board relay issue Temperature sensor malfunction	Check the heating element for continuity Inspect wiring connections to the heating element Test the control board relay Replace the heating element if faulty Check the temperature sensor Contact a qualified technician
E04	Motor problem	Motor overload Faulty motor Motor capacitor problem Belt issue	Reduce the load size Check the motor for proper operation Test the motor capacitor Inspect the drive belt for damage Replace faulty components as needed Contact a qualified technician
E05	Door lock error	Door not properly closed Faulty door lock mechanism Door lock sensor malfunction Electrical connection issue	Ensure the door is fully closed and latched Check the door lock mechanism for damage Test the door lock sensor Inspect electrical connections to the door lock Replace the door lock assembly if faulty
E06	Unbalance detected	Uneven load distribution Heavy items on one side Machine not level	Redistribute the load evenly in the drum Remove heavy items and wash separately Check that the machine is level Adjust the machine feet if needed

Dishwasher Error Codes

Error codes for Fisher & Paykel dishwashers including water inlet, drainage, heating, and filter issues.

Error Code	Meaning	Possible Causes	Solutions
E01	Water inlet problem	Water tap closed or not fully open Inlet hose kinked or blocked Faulty inlet valve Low water pressure	Check that the water tap is fully open Inspect the inlet hose for kinks or blockages Test the inlet valve and replace if faulty Check water pressure in your home Ensure the inlet hose is properly connected
E02	Drainage problem	Drain hose kinked or blocked Filter blocked or dirty Drain pump faulty Drain hose positioned incorrectly	Check the drain hose for kinks or blockages Clean the filter in the bottom of the dishwasher Ensure the drain hose is positioned correctly Test the drain pump and replace if faulty Remove any food particles or debris from the drain system
E03	Heating problem	Faulty heating element Heating element wiring problem Control board relay issue	Check the heating element for continuity Inspect wiring connections to the heating element Test the control board relay Replace the heating element if faulty Contact a qualified technician
E04	Temperature sensor error	Faulty temperature sensor Sensor wiring problem Control board error	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes

Dryer Error Codes

Error codes for Fisher & Paykel dryers including lint filter, heating element, motor, and airflow issues.

Error Code	Meaning	Possible Causes	Solutions
E01	Lint filter full	Lint filter not cleaned regularly Excessive lint accumulation	Remove the lint filter Clean the lint filter thoroughly Reinsert the lint filter properly Clean the lint filter after each use
E02	Heating element error	Faulty heating element Heating element wiring problem Thermal fuse blown	Check the heating element for continuity Test the thermal fuse and replace if blown Inspect electrical connections to the heating element Replace the heating element if faulty Contact a qualified technician
E03	Motor error	Faulty motor Motor capacitor problem Belt issue	Check the motor for proper operation Test the motor capacitor Inspect the drive belt for damage Replace faulty components as needed Contact a qualified technician
E04	Airflow obstruction	Blocked ventilation Lint filter full Blocked exhaust vent Restricted airflow	Clean the lint filter thoroughly Check the exhaust vent for blockages Ensure proper ventilation around the dryer Remove any obstructions from the airflow path

Oven and Cooktop Error Codes

Error codes for Fisher & Paykel ovens and cooktops including overheating, technical faults, and display issues.

Error Code	Meaning	Possible Causes	Solutions
A1	Oven overheated	Oven temperature too high Thermal protection triggered Ventilation blocked	Allow the oven to cool down Switch the oven off and then back on Check for blocked ventilation Wait for the oven to cool before using again
A5	Microwave system overheated	Microwave system temperature too high Thermal protection triggered Excessive use	Allow the oven to cool down Switch the oven off and then back on Wait for the system to cool before using again
E	General error code	Control board error Electronic system malfunction Communication failure	Hold the power switch to turn off the cooktop Wait a few seconds and turn the cooktop back on If the error code persists, turn off the power supply at the wall and turn it back on Note the error code and contact customer service or an authorized service technician
F + Number	Technical fault	Control board error Component malfunction System error	Note the error code Allow the oven to cool down Contact customer service with the error code Seek assistance from an authorized service technician

Need More Help?

If you're experiencing issues with your Fisher & Paykel appliance that aren't covered by these error codes, or if the solutions provided don't resolve your problem, we recommend:

Consulting your Fisher & Paykel appliance user manual for model-specific information
Contacting Fisher & Paykel customer service in Australia for technical support
Seeking assistance from a qualified appliance repair technician
Checking for warranty coverage if your appliance is still under warranty

Back to All Brands Browse Diagnostic Database