Haier Household Appliance Error Codes

Complete diagnostic guide for Haier household appliances in Australia including washing machines, dryers, dishwashers, and refrigerators.

Washing Machine Error Codes

Error codes for Haier washing machines including door, drainage, temperature sensor, and motor issues.

Error Code	Meaning	Possible Causes	Solutions
Err1	Door error - door not closed within 20 seconds	Door not properly closed Faulty door lock mechanism Door sensor malfunction Door switch defective	Ensure the door is fully closed and latched Check the door lock mechanism for damage Test the door sensor Inspect the door switch and replace if faulty Wait a few seconds and try closing the door again
Err2	Drainage error	Drain filter blocked Drain hose kinked or blocked Faulty drain pump Drain hose positioned too high Blockage in drain system	Clean the drain filter located at the front bottom of the machine Check the drain hose for kinks or blockages Ensure the drain hose is positioned correctly Test the drain pump and replace if faulty Remove any blockages from the drain system
Err3	Temperature sensor anomaly detected	Faulty temperature sensor Sensor wiring problem Control board malfunction Sensor connection loose	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes Inspect wiring for damage or corrosion
Err4	Resistance detection anomaly	Electrical connection problem Faulty component resistance Control board error Wiring harness issue	Check all electrical connections Test component resistance values Inspect the control board Check wiring harness for damage Contact a qualified technician if problem persists
Err5	Water level not reached within 8 minutes	Water tap closed or not fully open Inlet hose kinked or blocked Faulty inlet valve Low water pressure Inlet filter blocked	Check that the water tap is fully open Inspect the inlet hose for kinks or blockages Clean the inlet filter if accessible Check water pressure in your home Test the inlet valve and replace if faulty
Err6	Irregular drum rotation speed	Belt loose or damaged Motor problem Drum bearing issue Load imbalance	Check the drive belt for wear or damage Test the motor for proper operation Inspect drum bearings Redistribute the load evenly Replace faulty components as needed
Err7	Motor block overheating	Motor overload Ventilation blocked Faulty motor Excessive load	Allow the machine to cool down for 30 minutes Check for blocked ventilation Reduce the load size Test the motor and replace if faulty Contact a qualified technician
Err8	Maximum allowed water level exceeded	Water level sensor malfunction Inlet valve not closing Control board error Overfilling protection failure	Check the water level sensor Test the inlet valve Check the control board Ensure overfilling protection is working Contact a qualified technician

Dishwasher Error Codes

Error codes for Haier dishwashers including door sensor, filling, drainage, temperature sensor, and overflow issues.

Error Code	Meaning	Possible Causes	Solutions
E1	Door closure sensor damaged	Faulty door closure sensor Sensor wiring problem Door not properly closed Control board malfunction	Ensure the door is fully closed Check the door closure sensor Test the sensor with a multimeter Inspect wiring connections Replace the sensor if faulty
E2	Filling anomaly	Water tap closed or not fully open Inlet hose kinked or blocked Faulty inlet valve Low water pressure Inlet filter blocked	Check that the water tap is fully open Inspect the inlet hose for kinks or blockages Test the inlet valve and replace if faulty Check water pressure in your home Clean the inlet filter
E3	Drainage not working properly	Drain hose kinked or blocked Filter blocked or dirty Drain pump faulty Drain hose positioned incorrectly	Check the drain hose for kinks or blockages Clean the filter in the bottom of the dishwasher Ensure the drain hose is positioned correctly Test the drain pump and replace if faulty Remove any food particles or debris from the drain system
E4	Temperature sensor detects anomaly	Faulty temperature sensor Sensor wiring problem Control board malfunction	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes
E5	Flood overflow occurs	Water level sensor malfunction Inlet valve not closing Drain pump failure Overflow protection system activated	Check the water level sensor Test the inlet valve Check the drain pump Ensure overflow protection is working Contact a qualified technician immediately
1000	Door closure sensor problem	Faulty door closure sensor Sensor wiring problem	Check the door closure sensor Test sensor connections Replace the sensor if faulty
0001	Error during filling	Water supply problem Inlet valve issue Low water pressure	Check water supply Test the inlet valve Check water pressure
0100	Error during drainage	Drain pump problem Drain hose blocked Filter blocked	Check the drain pump Inspect the drain hose Clean the filter
1001	CNT sensor anomaly	Faulty CNT sensor Sensor wiring problem	Check the CNT sensor Test sensor connections Replace if faulty
0000	Burst system activated to prevent flooding	Water overflow detected Safety system triggered	Turn off the dishwasher immediately Check for water leaks Contact a qualified technician Do not use until repaired

Refrigerator Error Codes

Error codes for Haier refrigerators including temperature sensor and drainage issues.

Error Code	Meaning	Possible Causes	Solutions
F1	Refrigerator compartment temperature sensor error	Faulty temperature sensor Sensor wiring problem Control board malfunction	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes
F2	Freezer compartment temperature sensor error	Faulty temperature sensor Sensor wiring problem Control board malfunction	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes
F3	Room temperature sensor error	Faulty room temperature sensor Sensor wiring problem Control board malfunction	Check the room temperature sensor connections Test the sensor with a multimeter Replace the sensor if faulty Check the control board
F5	No condensate drainage from refrigerator	Drain hole blocked Drain tube blocked Drain pan full Drain system malfunction	Clean the drain hole at the back of the refrigerator Check the drain tube for blockages Empty the drain pan Use a pipe cleaner to clear blockages Contact a qualified technician if problem persists

Dryer Error Codes

Error codes for Haier dryers including lint filter and drain pump issues.

Error Code	Meaning	Possible Causes	Solutions
E6	Lint filter is full	Lint filter not cleaned regularly Excessive lint accumulation	Remove the lint filter Clean the lint filter thoroughly Reinsert the lint filter properly Clean the lint filter after each use Check for any remaining lint in the filter housing
E2	Drain pump possibly defective	Faulty drain pump Drain pump blocked Electrical connection problem	Check the drain pump for blockages Test the drain pump operation Inspect electrical connections Replace the drain pump if faulty Contact a qualified technician

Need More Help?

If you're experiencing issues with your Haier appliance that aren't covered by these error codes, or if the solutions provided don't resolve your problem, we recommend:

Consulting your Haier appliance user manual for model-specific information
Contacting Haier customer service in Australia for technical support
Seeking assistance from a qualified appliance repair technician
Checking for warranty coverage if your appliance is still under warranty

Back to All Brands Browse Diagnostic Database