Hisense Household Appliance Error Codes

Complete diagnostic guide for Hisense household appliances in Australia including washing machines, dryers, dishwashers, and refrigerators.

Washing Machine Error Codes

Error codes for Hisense washing machines including temperature sensor, water inlet, drainage, overheating protection, and communication issues.

Error Code	Meaning	Possible Causes	Solutions
E1	Temperature sensor error	Faulty temperature sensor Sensor wiring problem Control board malfunction Sensor connection loose	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes Inspect wiring for damage or corrosion
E2	Water inlet error	Water tap closed or not fully open Inlet hose kinked or blocked Faulty inlet valve Low water pressure Inlet filter blocked	Check that the water tap is fully open Inspect the inlet hose for kinks or blockages Clean the inlet filter if accessible Check water pressure in your home Test the inlet valve and replace if faulty Ensure the inlet hose is properly connected
E3	Drainage error	Drain filter blocked Drain hose kinked or blocked Faulty drain pump Drain hose positioned too high Blockage in drain system	Clean the drain filter located at the front bottom of the machine Check the drain hose for kinks or blockages Ensure the drain hose is positioned correctly Test the drain pump and replace if faulty Remove any blockages from the drain system
E4	Overheating protection activated	Motor overheating Excessive load Ventilation blocked Faulty motor Thermal protection triggered	Allow the machine to cool down for 30 minutes Reduce the load size Check for blocked ventilation Test the motor and replace if faulty Contact a qualified technician
E5	Communication error between components	Control board communication failure Wiring harness problem Component connection issue Control board malfunction	Check all component connections Inspect the wiring harness for damage Test the control board Reset the machine by unplugging for 5 minutes Contact a qualified technician
E6	Door lock error	Door not properly closed Faulty door lock mechanism Door sensor malfunction Electrical connection issue	Ensure the door is fully closed and latched Check the door lock mechanism for damage Test the door lock sensor Inspect electrical connections to the door lock Replace the door lock assembly if faulty
E7	Motor error	Faulty motor Motor capacitor problem Belt issue Motor overload	Check the motor for proper operation Test the motor capacitor Inspect the drive belt for damage Reduce the load size Replace faulty components as needed
E8	Water level sensor error	Faulty water level sensor Sensor wiring problem Control board error	Check the water level sensor connections Test the sensor with a multimeter Replace the sensor if faulty Check the control board for error codes

Dishwasher Error Codes

Error codes for Hisense dishwashers including temperature sensor, water inlet, drainage, and communication issues.

Error Code	Meaning	Possible Causes	Solutions
E1	Temperature sensor error	Faulty temperature sensor Sensor wiring problem Control board malfunction	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes
E2	Water inlet error	Water tap closed or not fully open Inlet hose kinked or blocked Faulty inlet valve Low water pressure	Check that the water tap is fully open Inspect the inlet hose for kinks or blockages Test the inlet valve and replace if faulty Check water pressure in your home Ensure the inlet hose is properly connected
E3	Drainage error	Drain hose kinked or blocked Filter blocked or dirty Drain pump faulty Drain hose positioned incorrectly	Check the drain hose for kinks or blockages Clean the filter in the bottom of the dishwasher Ensure the drain hose is positioned correctly Test the drain pump and replace if faulty Remove any food particles or debris from the drain system
E4	Overheating protection activated	Heating element overheating Temperature too high Thermal protection triggered	Allow the dishwasher to cool down Check the heating element Test the thermal protection Contact a qualified technician
E5	Communication error between components	Control board communication failure Wiring harness problem Component connection issue	Check all component connections Inspect the wiring harness Reset the dishwasher by unplugging for 5 minutes Contact a qualified technician

Refrigerator Error Codes

Error codes for Hisense refrigerators including temperature sensor and system issues.

Error Code	Meaning	Possible Causes	Solutions
E1	Refrigerator compartment temperature sensor error	Faulty temperature sensor Sensor wiring problem Control board malfunction	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes
E2	Freezer compartment temperature sensor error	Faulty temperature sensor Sensor wiring problem Control board malfunction	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes
E3	Defrost system error	Faulty defrost heater Defrost sensor malfunction Control board error	Check the defrost heater for continuity Test the defrost sensor Check the control board for error codes Replace faulty components as needed
E4	Compressor error	Compressor overload Electrical connection problem Faulty compressor relay	Allow the refrigerator to rest for 30 minutes Check electrical connections to the compressor Test the compressor relay Contact a qualified technician

Dryer Error Codes

Error codes for Hisense dryers including temperature sensor, heating, and motor issues.

Error Code	Meaning	Possible Causes	Solutions
E1	Temperature sensor error	Faulty temperature sensor Sensor wiring problem Control board malfunction	Check the temperature sensor connections Test the sensor with a multimeter Replace the temperature sensor if faulty Check the control board for error codes
E2	Heating element error	Faulty heating element Temperature sensor malfunction Thermal fuse blown	Check the heating element for continuity Test the temperature sensor Check the thermal fuse and replace if blown Inspect electrical connections
E3	Motor error	Faulty motor Motor capacitor problem Belt issue	Check the motor for proper operation Test the motor capacitor Inspect the drive belt for damage Replace faulty components as needed
E4	Lint filter full	Lint filter not cleaned regularly Excessive lint accumulation	Remove the lint filter Clean the lint filter thoroughly Reinsert the lint filter properly Clean the lint filter after each use

Need More Help?

If you're experiencing issues with your Hisense appliance that aren't covered by these error codes, or if the solutions provided don't resolve your problem, we recommend:

Consulting your Hisense appliance user manual for model-specific information
Contacting Hisense customer service in Australia for technical support
Seeking assistance from a qualified appliance repair technician
Checking for warranty coverage if your appliance is still under warranty

Back to All Brands Browse Diagnostic Database