SMEG Household Appliance Error Codes

Complete diagnostic guide for SMEG household appliances in Australia including washing machines, dryers, dishwashers, ovens, and refrigerators.

Washing Machine Error Codes

Error codes for SMEG washing machines including temperature sensor, heating element, water inlet, drainage, motor, and door lock issues.

Error CodeMeaningPossible CausesSolutions
E01NTC temperature sensor error
  • Faulty temperature sensor (NTC)
  • Sensor wiring problem
  • Control board malfunction
  • Sensor connection loose or damaged
  • Check the temperature sensor connections
  • Test the NTC sensor with a multimeter
  • Replace the temperature sensor if faulty
  • Check the control board for error codes
  • Inspect wiring for damage or corrosion
E02Heating element error
  • Faulty heating element
  • Heating element wiring problem
  • Control board relay issue
  • Heating element burned out
  • Check the heating element for continuity
  • Inspect wiring connections to the heating element
  • Test the control board relay
  • Replace the heating element if faulty
  • Check for proper electrical supply
E03Heating relay error
  • Stuck heating relay
  • Faulty relay on control board
  • Relay wiring problem
  • Check the heating relay on the control board
  • Test the relay for proper operation
  • Replace the control board if relay is faulty
  • Inspect relay wiring connections
E04Water overflow
  • Faulty water inlet valve
  • Water level sensor malfunction
  • Control board error
  • Inlet valve stuck open
  • Check the water inlet valve operation
  • Test the water level sensor
  • Inspect the control board for errors
  • Replace the inlet valve if stuck open
  • Ensure proper water pressure
E05Drainage error
  • Faulty drain pump
  • Blocked drain lines
  • Drain filter blocked
  • Drain hose kinked or blocked
  • Check the drain pump operation
  • Clean the drain filter
  • Inspect drain lines for blockages
  • Check the drain hose for kinks or blockages
  • Test the drain pump and replace if faulty
E06Motor error
  • Motor short circuit
  • Faulty motor
  • Motor capacitor problem
  • Belt issue
  • Check the motor for short circuits
  • Test the motor with a multimeter
  • Check the motor capacitor
  • Inspect the drive belt for damage
  • Replace faulty motor components
E09Door lock error
  • Door not properly closed
  • Faulty door lock mechanism
  • Door lock sensor malfunction
  • Electrical connection issue
  • Ensure the door is fully closed and latched
  • Check the door lock mechanism for damage
  • Test the door lock sensor
  • Inspect electrical connections to the door lock
  • Replace the door lock assembly if faulty

Dishwasher Error Codes

Error codes for SMEG dishwashers including overflow, heating, temperature sensor, water inlet, drainage, and flow meter issues.

Error CodeMeaningPossible CausesSolutions
E1 / E9Overflow / Flooding
  • Faulty inlet valve
  • Blocked filter
  • Excessive foam formation
  • Water level sensor malfunction
  • Check the inlet valve for proper operation
  • Clean the filter thoroughly
  • Use appropriate dishwasher detergent
  • Test the water level sensor
  • Replace the inlet valve if faulty
E2Overflow
  • Pressure switch problem
  • Connection error
  • Water level sensor malfunction
  • Check the pressure switch
  • Inspect all connections
  • Test the water level sensor
  • Replace faulty components as needed
E3No heating
  • Faulty heating element
  • Faulty connections
  • Control board relay issue
  • Check the heating element for continuity
  • Inspect all electrical connections
  • Test the control board relay
  • Replace the heating element if faulty
E4Temperature sensor error
  • Faulty temperature sensor
  • Connection problems
  • Control board error
  • Check the temperature sensor connections
  • Test the sensor with a multimeter
  • Replace the temperature sensor if faulty
  • Check the control board for error codes
E5No water inlet
  • Faulty inlet valve
  • Kinked or blocked inlet hose
  • Water tap closed or low pressure
  • Inlet filter blocked
  • Check that the water tap is fully open
  • Inspect the inlet hose for kinks or blockages
  • Test the inlet valve and replace if faulty
  • Clean the inlet filter if accessible
  • Check water pressure in your home
E6No drainage
  • Blocked filter
  • Faulty drain pump
  • Drain hose kinked or blocked
  • Drain system blockage
  • Clean the filter in the bottom of the dishwasher
  • Check the drain hose for kinks or blockages
  • Test the drain pump and replace if faulty
  • Remove any food particles or debris from the drain system
  • Ensure the drain hose is positioned correctly
E7Flow meter error
  • Control board problem
  • Flow meter malfunction
  • Reset required
  • Reset the dishwasher by unplugging for 5 minutes
  • Check the control board for error codes
  • Test the flow meter
  • Contact a qualified technician if problem persists

Oven Error Codes

Error codes for SMEG ovens including temperature sensor, ignition, and control board issues.

Error CodeMeaningPossible CausesSolutions
Err2Temperature sensor error
  • Faulty temperature sensor
  • Sensor wiring problem
  • Control board malfunction
  • Check the temperature sensor connections
  • Test the sensor with a multimeter
  • Replace the temperature sensor if faulty
  • Check the control board for error codes
Err4Ignition error
  • Gas supply problems
  • Faulty ignition electrodes
  • Ignition system malfunction
  • Gas valve issue
  • Check the gas supply is turned on
  • Inspect the ignition electrodes for damage
  • Clean the ignition electrodes
  • Test the gas valve operation
  • Contact a qualified gas technician if needed
Err6Control board error
  • Faulty control board
  • Control board communication failure
  • Electrical connection problem
  • Reset the oven by unplugging for 5 minutes
  • Check all electrical connections
  • Test the control board
  • Replace the control board if faulty
  • Contact a qualified technician

Dryer Error Codes

Error codes for SMEG dryers including heating element, airflow, and drum rotation issues.

Error CodeMeaningPossible CausesSolutions
Err1Heating element error
  • Faulty heating element
  • Heating element wiring problem
  • Thermal fuse blown
  • Check the heating element for continuity
  • Test the thermal fuse and replace if blown
  • Inspect electrical connections to the heating element
  • Replace the heating element if faulty
Err3Airflow obstruction
  • Blocked ventilation
  • Lint filter full
  • Blocked exhaust vent
  • Restricted airflow
  • Clean the lint filter thoroughly
  • Check the exhaust vent for blockages
  • Ensure proper ventilation around the dryer
  • Remove any obstructions from the airflow path
  • Clean the lint filter after each use
Err5Drum rotation error
  • Blocked or loose parts
  • Faulty motor
  • Belt problem
  • Drum obstruction
  • Check for any loose or blocked parts in the drum
  • Inspect the drive belt for damage
  • Test the motor for proper operation
  • Remove any obstructions from the drum
  • Replace faulty components as needed

Refrigerator Error Codes

Error codes for SMEG refrigerators including temperature sensor and system issues.

Error CodeMeaningPossible CausesSolutions
E01Refrigerator compartment temperature sensor error
  • Faulty temperature sensor
  • Sensor wiring problem
  • Control board malfunction
  • Check the temperature sensor connections
  • Test the sensor with a multimeter
  • Replace the temperature sensor if faulty
  • Check the control board for error codes
E02Freezer compartment temperature sensor error
  • Faulty temperature sensor
  • Sensor wiring problem
  • Control board malfunction
  • Check the temperature sensor connections
  • Test the sensor with a multimeter
  • Replace the temperature sensor if faulty
  • Check the control board for error codes
E03Defrost system error
  • Faulty defrost heater
  • Defrost sensor malfunction
  • Control board error
  • Check the defrost heater for continuity
  • Test the defrost sensor
  • Check the control board for error codes
  • Replace faulty components as needed
E04Compressor error
  • Compressor overload
  • Electrical connection problem
  • Faulty compressor relay
  • Allow the refrigerator to rest for 30 minutes
  • Check electrical connections to the compressor
  • Test the compressor relay
  • Contact a qualified technician

Need More Help?

If you're experiencing issues with your SMEG appliance that aren't covered by these error codes, or if the solutions provided don't resolve your problem, we recommend:

  • Consulting your SMEG appliance user manual for model-specific information
  • Contacting SMEG customer service in Australia for technical support
  • Seeking assistance from a qualified appliance repair technician
  • Checking for warranty coverage if your appliance is still under warranty